2020-04-08

LOCTITE 242 Blau ja M36 -55 bis +150 °C Mittel 11,5 Nm ja LOCTITE 243 Blau ja M36 -55 bis +180 °C Mittel 26 Nm ja LOCTITE 245 Blau ja M80 -55 bis +150 °C Mittel 13 Nm ja LOCTITE 248 Stick Blau ja M50 -55 bis +150 °C Mittel 17 Nm – LOCTITE 262 Rot ja M25 -55 bis +150 °C Mittel/Hoch 22 Nm ja

For optimal storage, maintain product at a temperature between 8°C (46°F) to 21°C (70°F). Storage below 8°C (46°F) or greater than 28°C (82°F) can adversely affect product properties. Safety Data Sheet Page 1 of 9 LOCTITE 242 MEDIUM STRENGTH THREADLOCKER known as 242 Threadlocker 50ML EN/CH/JP SDS No. : 150233 V001.12 Revision: 05.03.2018 IDH number: 135354 Product name: LOCTITE® 242™ THREADLOCKER MEDIUM STRENGTH Page 3 of 6 7. HANDLING AND STORAGE Handling: Use only with adequate ventilation.

Loctite 242 storage temperature

242- Blue- Medium strength thread locker for fasteners up to 3/4". Cures reliably even on stainless steel. Tolerant of … Loctite 272 & 278 – Temperature Resistant If you need something with a medium viscosity which can be used for relatively high strength applications, then Loctite 272 is a better bet for you – its designed to be used for permanent thread locking, so you know it’s going to be high strength. The cure speed of LOCTITE thread sealant depends upon the thread material, thread size and temperature. For fine thread sizes, full cure can be obtained within 24 hours.

For optimal storage, maintain product at a temperature between 8°C (46°F) to 21°C (70°F). Storage below 8°C (46°F) or greater than 28°C (82°F) can adversely affect product properties.

Item No. : 24231 / IDH No. 135355 Product name: LOCTITE® 242® THREADLOCKER 1 of 5 Material Safety Data Sheet Revision Date: 06/16/2008 Issue date: 06/16/2008 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: LOCTITE® 242® THREADLOCKER Item No. : 24231 / IDH No. 135355 Product type: Anaerobic Sealant Region: United States Company address:

In stock and ready to ship. M10 fastener without LOCTITE® 225™ TYPICAL ENVIRONMENTAL RESISTANCE Cured for 1 week @ 22 °C Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m: M10 zinc phosphate steel nuts and bolts Hot Strength Tested at temperature % Strength @ 22 °C Temperature, °C 100 75 50 25 0 0 50 100 150 Heat Aging Aged at temperature indicated and tested @ 22 °C ‘Do It Right’ User’s Guide When, Where & How to Use LOCTITE® Maintenance Products Global Distributor of Henkel LOCTITE (800) 888-0698 info@ellsworth.com SDS No.: 168430 V006.0 LOCTITE 222 Page 11 of 13 Hazardous substances CAS-No. Bioconcentratio n factor (BCF) Exposure time Temperature Species Method Cumene hydroperoxide 80-15-9 9,1 calculation OECD Guideline 305 (Bioconcentration: Flow-through Fish Test) Hazardous substances CAS-No. Bioconcentratio n factor (BCF) Exposure time Temperature Species Method 12.4.

Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. Resistant to vibration.

Range -65 Degrees to 300 Degrees F 11 Jan 2018 Product name: LOCTITE® 242® THREADLOCKER MEDIUM STRENGTH PART NO. Stable under normal conditions of storage and use. 30 Jun 2003 Existing conditions aggravated by exposure: Skin disorders.
Fabrique brod

Product Code(s): 135356, 135355, 1436428 Part Number(s): 24241(250 ml), 24231(50 ml),33508 (50ml) Use: Anaerobic adhesive. Minimum Operating Temperature:-65°F Package Quantity: 10CA Availability: In Stock Maximum Storage Temperature: 82 Minimum Storage Temperature: 46 TDS LOCTITE® 290™, December-2013 Cure Speed vs. Temperature The rate of cure will depend on the temperature.

160.
Wången häst

11 Jan 2018 IDH number: 209729. Product name: LOCTITE® 242® THREADLOCKER Stable under normal conditions of storage and use. Hazardous

The product cures anaerobically, when there is an absence of air between close fitting metal surfaces. LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities.

English entrepreneurs

242 (Blå LOCTITE) M Stryk på LOCTITE No. 572 N Stryk 242 (sininen) M LOCTITE No. Components should be at room temperature.

HANDLING AND STORAGE Handling: Use only with adequate ventilation. Prevent contact with eyes, skin and Shelf Life for Loctite® Products What is the Henkel shelf life policy for Loctite® products? The shelf life period for Loctite® products is one year from date of shipment from Henkel facilities or as indicated by package labeling. For optimal storage, maintain product at a temperature between 8°C (46°F) to 21°C (70°F). Storage Temp range - 65 to 300 degrees F. Cure Speed 20 min.

IDH number: 135354 Product name: LOCTITE® 242™ THREADLOCKER MEDIUM STRENGTH Page 5 of 6 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: Follow all local, state, federal and provincial regulations for disposal. Hazardous waste number: Not a RCRA hazardous waste. 14. TRANSPORT

Delivers great performance with tensile strength of 110 psi. Minimum to maximum operating temperatures are -65 F to +300 F. Comes in a 10 ml Bottle. Shelf Life for Loctite® Products What is the Henkel shelf life policy for Loctite® products? The shelf life period for Loctite® products is one year from date of shipment from Henkel facilities or as indicated by package labeling. For optimal storage, maintain product at a temperature between 8°C (46°F) to 21°C (70°F).

Conditions orders over $35. Buy Loctite Threadlocker Blue 242, 6 ml Squeeze Tube at Walmart.com. Loctite 37480 Threadlocker 272 High Temp Red. $15.99$15.99. Special customer specification requirements may be coordinated through Henkel Quality. Storage. Store product in the unopened container in a dry location.